Agrifac HighTechAir and StrictSprayPlus Technology

HTA
This system ensures a constant and easily set droplet size. Changing (weather) conditions, the right amount of chemicals, a smaller window of opportunity. These are challenges that are easy to tackle with the HighTechAirPlus system. HighTechAirPlus is a combination of traditional spraying, air assistance and mixing in the nozzle holders. Liquid is delivered to the nozzle by pressure.  But air is also delivered, created by a dedicated air pump.  Both air and liquid make their way through the same nozzle. The perfect combination to create a constant and easily set droplet size that can be adjusted to changing conditions from the cab.

With Agrifac HighTechAirPlus, you have a higher capacity, never have to change nozzles, and can spray with less drift. HighTechAirPlus means you always spray with the right droplet size. The droplet size can be steplessly adjusted from very fine to coarse, so you have optimal crop coverage in every case. The spray quality is also higher because the sprayer is less sensitive to wind.

Benefits:

  • Less water needed for spraying, offering more capacity
  • Eliminate wind impact; less drift so less chemicals
  • More spraying hours, so higher capacity
  • Droplet More spraying hours, so higher capacity, select the desired droplet size
  • Better penetration of the droplets into the crop
  • HighTechAirPlus nozzles cater to a variety of crops
  • Minimum wear and tear on the nozzle equals longer life
  • Clogged nozzles are a thing of the past
  • No nozzles change between crops or types of spraying

 

StrictSprayPlus
Today, it’s customary to set the machine so that all plants get at least the desired amount of chemicals. The application rate and the concentration in the tank are set for a specific situation, not targeting any specific area or needs. This results in an application rate that is too high in most areas of the field, and too low in others. Therefore, too many chemicals are being applied resulting in uneven distribution over the field. Agrifac decided to address this deficiency with StrictSprayPlus.

Farmers need the certainty that a desired amount of chemicals is sprayed where it is needed. This ensures that the chemicals can do their work and the right plant can be fed and protected at the right time.

StrictSprayPlus has three features that contribute to the application of the precise amount of chemicals:

  1. To prevent overlapping and overdosing as much as possible, each nozzle can be closed and opened individually.
  2. When turning during spraying, different nozzles travel at different speeds. In the outside of the turn, the nozzles have to spray further than in the inside of a turn. In order to spray the same amount consistently, faster travelling nozzles have to spray more and slower travelling nozzles less. StrictSprayPlus is the first system that really compensates for turns and delivers 100% spray coverage everywhere.
  3. The amount is regulated by changing the water pressure. Changes in pressure not only change the speed at which liquid flows through each nozzle, but also the spray pattern and the droplet size. StrictSprayPlus does not have to change the spray pressure, so spray pattern and droplet size remain the same, irrespective of the flow speed.

In order to achieve this, StrictSprayPlus calculates the speed and the desired spray amount for each nozzle. The values are used to determine how much each individual nozzle should spray. The flow speed is controlled by changing the time that the fast switching nozzle (100 times per second max.) opens and closes. The amount for each nozzle is determined by changing the ratio and the frequency between open and closed. The variable frequency and the ability to change the open and close time for each nozzle individually keeps the number of switches per second as low as possible and as high as necessary. This guarantees good coverage, a precise spray pattern and a longer valve life.